https://docs.opsero.com/op063/guides/Recent content in Guides on Opsero DocsHugoenCopyright (c) 2026 Opsero Electronic Design Inc.Mon, 23 Feb 2026 00:00:00 -0500https://docs.opsero.com/op063/guides/getting-started/Mon, 23 Feb 2026 00:00:00 -0500https://docs.opsero.com/op063/guides/getting-started/<h2 id="minimum-setup">Minimum setup</h2> <p>To start developing with the FPGA Drive FMC Gen4, we recommend that you get setup with the minimum hardware and software requirements:</p>https://docs.opsero.com/op063/guides/programming/Mon, 23 Feb 2026 00:00:00 -0500https://docs.opsero.com/op063/guides/programming/<p>This section provides the details of the programming requirements to operate the FPGA Drive FMC Gen4 hardware and customise functionality.</p>https://docs.opsero.com/op063/guides/troubleshooting/Mon, 23 Feb 2026 00:00:00 -0500https://docs.opsero.com/op063/guides/troubleshooting/<p>This section describes some of the common issues that can arise when using the mezzanine card.</p> <h2 id="fmc-pwr-good-led">FMC PWR GOOD LED</h2> <h5 id="problem">Problem:</h5> <p>The red &ldquo;FMC PWR GOOD&rdquo; LED is not lighting up when I power up my carrier board.</p>